
Material-aware
engineering.
Bag Eng integrates civil geomatics, electrical design and harness build, mechanical fabrication and materials verification, and structural design-build—so specifications, standards, and shop reality stay linked from first measurement to final assembly.
Specified services, traceable standards.
Each discipline page lists the exact services and code references Bag Eng works to—not a marketing checklist. Use the summaries below for orientation; open a discipline for full conformance notes, service definitions, and field photography.
01Data Acquisition and Geomatic Analysis
Civil work at Bag Eng centres on acquiring reliable field and geospatial data and turning it into usable information for layout, grading, survey, shoreline, and GIS workflows. The emphasis is on measurable site conditions—coordinates, surfaces, and geographic context—so downstream mechanical, structural, and electrical decisions rest on documented inputs rather than assumptions.
Selected capabilities
- —Layouts
- —Grading
- —Surveys
- —Shoreline protection
- —GIS data analysis
- Discipline
- Civil
- Scope
- Data Acquisition and Geomatic Analysis
- Services
- 5 listed capabilities
02Design and manufacture
Electrical services cover design, documentation, and physical harness manufacture for low-voltage and familiar industrial voltage classes. Work is developed with CSA C22.1 / OESC conformance in mind, with drawings and assemblies suitable for integration into equipment, mobile structures, and shop-built systems. High-voltage field installation is outside this scope and must be executed by a licensed electrical contractor (LEC) through the Electrical Safety Authority (ESA).
Selected capabilities
- —Design and conformance
- —Drawings
- —Harness manufacture
- Discipline
- Electrical
- Scope
- Design and manufacture
- Conformance
- CSA C22.1 / OESC
- Services
- 3 listed capabilities
03Design and manufacture
Mechanical engineering and manufacture span digital deliverables (DXF, DWG, STL, CAD/CAM), shop fabrication, and validation of material behaviour. Processes include machining, forming, multi-material welding, coatings, and material testing/heat treating, alongside automotive diagnostics, repair, design, and rebuilds. Applicable NBCC and CSA references (including B51, B52, B56, B335, B365, B415, and CMVSS) frame conformance expectations for the systems Bag Eng designs and builds.
Selected capabilities
- —Drawings files (DXF / DWG / STL)
- —CAD / CAM files
- —Component manufacture
- —Machining: milling, turning, cutting, bending, forming
- —Welding: titanium, aluminum, stainless, and carbon steel
- Discipline
- Mechanical
- Scope
- Design and manufacture
- Conformance
- NBCC / CSA: B51 / B52 / B56 / B335 / B365 / B415 / CMVSS
- Services
- 8 listed capabilities
04Design-Build
Structural design-build combines analysis, modelling, and delivery for small-building and steel/container-type structures. Services include small building analysis, finite element analysis (FEA), and general contracting under the cited NBCC, OCB, A23, and CSA S16 / O86 / S304 framework. The principal engineer’s day-to-day structural involvement includes precast, cast-in-place (CIP), and steel systems, with material selection and behaviour tied closely to metallurgy.
Selected capabilities
- —Small building analysis
- —Finite element analysis
- —General Contracting
- Discipline
- Structural
- Scope
- Design-Build
- Conformance
- NBCC / OCB / A23 / CSA: S16 / O86 / S304
- Services
- 3 listed capabilities
From microstructure to field assembly.
Metallurgy sits at the centre of how Bag Eng reads structures and mechanical systems: material choice, weldability, heat treatment, coatings, and test evidence are treated as part of engineering quality, not an afterthought.

Spencer Lyndon Bagnall
P.Eng. · Licence #100571114
- Material testing & heat treating
Mechanical services explicitly include hardness testing, surface roughness measurement, load testing, and granular structural analysis, with heat treating when properties must be verified or adjusted. Results inform whether a part is acceptable before coatings (Cerakote, two-part epoxies, polyurethane systems) or assembly continue.
- Structural materials
The principal engineer is heavily involved with precast, cast-in-place (CIP), and steel structures. Structural design-build here means analysis and delivery that respect how those materials carry load, connect, and behave in service—not generic “steel package” wording.
- Welding & alloys
Welding spans titanium, aluminum, stainless, and carbon steel, paired with machining (milling, turning, cutting, bending, forming) and component manufacture. Alloy choice, joint access, and post-weld treatment are treated as engineering inputs, especially where metallurgy affects performance.
- View PEO credentials
Authentic environments — not stock renderings.
Images below come from Bag Eng’s own workshops, equipment, and sites. They document environments and types of work—fabrication, electrical bench work, container structures, and civil site context—not named client projects or performance guarantees.

Bag Eng container workshop on graded site. 
Graded exterior pad and site access. 
Open field site context for layout work. 
Exterior graded work area. 
Site access and exterior grading. 
Three-phase oscilloscope measurement. 
Harness assembly on bench. 
Fan and harness wiring. 
Panel wiring close-up. 
Control box electrical assembly. 
Trailer body fabrication. 
Trailer shell tilted in workshop. 
Trailer exterior in primer. 
Dual-axle chassis fabrication. 
Interior steel bench welding. 
Interior steel framing. 
Trailer interior with custom lighting. 
Interior workbench fit-out. 
Finished white trailer exterior. 
Mobile food service interior. 
Wood and steel counter with basins. 
CNC mill. 
Drive shaft and bearings. 
Shaft with pillow block bearings.
Submit scope
& constraints.
When you reach out, include the discipline(s) involved, applicable codes or standards, materials and environments, drawings or models if available, and your target timeline. That lets Bag Eng respond with a scoped conversation rather than a generic acknowledgement. High-voltage electrical installation must be performed by an LEC licensed through ESA.
Principal@bageng.ca
226-970-8291 · Spencer Lyndon Bagnall
49820 Lyons Line, Springfield, Ontario N0L 2J0
C of A #100687941 · Bag Eng Inc.



























